GE FANUC IC697ACC702 Bus Terminator Plug

The IC697ACC702 is a GE I/O Bus Terminator Plug specific to the GE Fanuc Series 90-70 CPU PARTS Programmable PLC Communicate MODULES Robots DCS. This bus terminator plug is typically supplied with each bus receiver module and is only required in the last bus receiver module in the chain. If the bus expansion module is not at the end of the chain, the terminator plug may be saved as extra or discarded depending on user preference. If the bus receiver module is at the end of the chain, then the terminator plug is required for the unit.The terminator plug should be installed in the lower expansion port labeled as Expansion Port Out. The plug can then be attached with the included screws. In a standard PLC system, this is accomplished by installing the resistor pack that is located inside of a terminator plug. In a hot standby CPU redundancy system, a special I/O cable is required. This has a built-in termination system. The manufacturer does recommend the use of a resistor plug with the terminated cable.When installing the IC697ACC702, the user must make sure the power to the unit is OFF and proper guidelines are followed per the manual. This particular I/O bus terminator plug is compatible with the GE Series 90-30 module and is required for each local expansion pack. The middle LED indicates the presence of a terminator plug on compatible models. Both conformal coat and low temperature testing options are available by special order.

IC697MDL753 The 5/48 Volt DC 0.5 Amp Negative Logic Output Module GE Fanuc 90-70 IC697MDL753 provides 32 output points in two isolated groups with 16 points in each...
IC697MDL940 The 16 point Relay Output Module GE Fanuc 90-70 IC697MDL940 is versatile, rugged, and easy to use. GE Fanuc 90-70 IC697MDL940 16 points - 8 isolated Form C -...
IC200ALG230 GE Versamax IC200ALG230 is an analog input module, 12 bit voltage/Current 4 Channel. The GE Versamax IC200ALG230 provides an interface to 4 voltage inputs or...
IC200ALG240 GE Versamax IC200ALG240 is an analog input module that has a 16 bit voltage/current isolated 8 ch analog Input. The GE Versamax IC200ALG240 has eight isolated...
IC200ALG260 The GE Versamax IC200ALG260 is an analog input module, 12 bit voltage/current 8 channels. GE Versamax IC200ALG260 provides an interface to 8 voltage inputs or...
IC200ALG261 The GE Versamax IC200ALG261 is an analog input and has a 15 bit differential voltage/current isolated 8ch analog input. The GE Versamax IC200ALG261 has eight...
IC200ALG262 The 15 bit differential current 8 channel GE Versamax IC200ALG262 is an analog input module. The GE Versamax IC200ALG262 provides an interface to 8 current...
IC200ALG263 The analog input module GE Versamax IC200ALG263 is a 15 bit voltage 15 channel single ended that is one group. The GE Versamax IC200ALG263 is capable of...
IC200ALG264 The analog input module, GE Versamax IC200ALG264 is a 15 bit current with 15 channels that provide an interface to 15 current inputs. The GE Versamax...
IC200ALG320 The GE Versamax IC200ALG320 provides four 4ma to 20ma analog current sourcing outputs. The GE Versa max IC200ALG320 is an analog output module, 12 bit...
IC200ALG321 The GE Versamax IC200ALG321 is a analog output mule, 12 bit voltage 0 to 10vdc Channels. The GE Versamax IC200ALG321 provides four analog voltage outputs....
IC200ALG322 GE Versamax IC200ALG322 is an analog output module, 12 bit voltage -10 to +10vdc 4 channels. GE Versamax IC200ALG322 analog output module. The GE Versamax...
IC200ALG325 GE Versamax IC200ALG325 is an analog output module, 13 bit voltage 8 channel. The GE Versamax IC200ALG325 provides eight analog voltage outputs ranging from...
IC200ALG327 The GE Versamax IC200ALG327 is a 13 bit voltage analog output module that provides 12 analog voltage outputs, with a range of -10vdc to +10vdc (bipolar) or 0v...
IC200ALG331 With the GE Versamax IC200ALG331 there are additional software-configurable features. The GE Versamax IC200ALG331 provides 4 analog outputs with additional...
IC200ALG430 The GE Versamax IC200ALG430 is an analog mixed module, 12 bit input current with 4 channels and output current with 2 channels. The GE Versamax IC200ALG430...
IC200ALG431 GE Versamax IC200ALG431 is an analog mixed module, 12 bit 0 to 10vdc with 4 channels for input and 2 channels for output. The GE Versamax IC200ALG431 provides...
IC200ALG432 Providing 4 words of analog input data the GE Versamax IC200ALG432 receives 2 words of analog output data. The GE Versamax IC200ALG432 is an analog mixed...
IC200ALG620 The GE Versamax IC200ALG620 is an analog input, 16 bit rdt, 4 channels. An intelligent module GE Versamax IC200ALG620 accepts input signals from up to 4...
IC200ALG630 The analog input, 16 bit thermocouple GE Versamax IC200ALG630 has 7 channels. An intelligent module the GE Versamax IC200ALG630 can accept 7 independent...
IC200BEM002 A communications module that exchanges plc reference table data on the profibus network the GE Versamax IC200BEM002 can read and write this data as though it...
IC200BEM103 A device network control module the GE Versamax IC200BEM103 is a communications module that can be configured to operate as a master, slave or both. The GE...
IC200CHS001 The GE Versamax IC200CHS001 is aBarrier-Style I/O Carrier that has 36 barrier-style terminals and the GE Versamax IC200CHS001 provides mounting, backplane...
IC200CHS002 GE Versamax IC200CHS002 is a box-style i/o carrier, with 36 iec box-style terminals and provides mounting, also the GE Versamax IC200CHS002field has backplane...
IC200CHS003 The GE Versamax IC200CHS003 is a connector-style i/o carrier that has a 36-pin connector for attaching an I/O cable and the GE Versamax IC200CHS003 provides...
IC200CHS005 GE Versamax IC200CHS005 is a spring-style i/o carrier that has 36 spring-clamp style terminals for field wiring. It provides mounting, backplane...
IC200CHS006 A communications carrier that provides mounting and backplane communications and field wiring for a fieldbus communications module the GE Versamax IC200CHS006...
IC200CHS011 The GE Versamax IC200CHS011 is a barrier-style interposing i/o Terminal. GE Versamax IC200CHS011 unit has a connector for attaching cable from the...
IC200CHS012 GE Versamax IC200CHS012 are box-style interposing i/o terminals. The GE Versamax IC200CHS012 interface a connector-style i/o carrier to field wiring and...
IC200CHS014 GE Versamax IC200CHS014 is a thermocouple compensation box-style interposing i/o terminals. The GE Versamax IC200CHS014 unit has a connector for...
IC200CHS015 GE Versamax IC200CHS015 is a spring-style interposing i/o terminal (IC200CHS015) interface a connector-style i/o carrier to field wiring. The GE Versamax...
IC200CHS022 A compact box-style i/o carrier, GE Versamax IC200CHS022 has 36 iec box-style terminals. The GE Versamax IC200CHS022 provides mounting, backplane...
IC200CHS025 The GE Versamax IC200CHS025 is a compact spring-style i/o carrier (IC200CHS025) has 36 iec box-style terminals. Providing mounting, backplane communications,...
IC200CHS101 The GE Versamax IC200CHS101 is a disconnect-style interposing i/o terminal main bate. GE Versamax IC200CHS101 provides terminals that correspond to the "a"...
IC200CHS102 Expansion base for the GE Versamax IC200CHS102 provides connection for terminals on the [b" side of the Versamax connector (b1-b18). The GE Versamax...
IC200CHS111 The GE Versamax IC200CHS111 is a main base relay-style interposing i/o terminals. The GE Versamax IC200CHS111 has an expansion connector (j2) that can be used...
IC200CHS112 GE Versamax IC200CHS112 is a relay expansion base that has a connector (j2) for attaching a ribbon cable to the expansion connector of the main base. The GE...
IC200CPU001
A CPU, GE Versamax IC200CPU001, has 2 serial ports, 34kb of configurable memory. The GE Versamax IC200CPU001 has support for 32-bit Modbus registers,...

IC200CPU002 The GE Versamax IC200CPU002 is a cpu with two serial ports, 42kb of configurable memory and the GE Versamax IC200CPU002 has non volatile flash memory for...
IC200CPU005 The GE Versamax IC200CPU005 is a cpu with two serial ports. The GE Versamax IC200CPU005 also has 64kb of configurable memory. The memory GE Versamax...
IC200CPUE05 Providing a built-in Ethernet interface the GE Versamax IC200CPUE05 can serve as the system controller for up to 64 modules with up to 2048 i/o points. The GE...
IC200DBI001 GE Versamax IC200DBI001 is a devicenet network interface unit. The GE Versamax IC200DBI001 is a devicenet slave module that acts as controller for a set of...
IC200DTX200 The IC200DTX200 from GE is an Operator Interface for changing timer/Counter/register values. 2 x 16 character LCD backlight display and 6 operation keys. No...
IC200DTX450 The IC200DTX450 from GE IP is Operator Interface with up to 200 stored messages. 2 x 16 character LCD backlight display and 6 function keys.
IC200DTX650 GE's IC200DTX650 Operator Interface provides up to 200 stored messages. 4 x 16 character LCD backlight display and 8 function keys.
IC200DTX850 IC200DTX850 from GE is an Operator Interface that supports up to 200 stored messages. 4 x 20 character LCD backlight display, 8 function keys and numeric...
IC200EBI001 Ethernet network interface unit GE Versamax IC200EBI001 serves as the connection point between Versamax i/o modules and a single 10/100base-t Ethernet...
IC200ERM001 The expansion transmitter module GE Versamax IC200ERM001 connects to up to seven expansion receiver modules in expansion "racks" and ge Versamax IC200ERM001...
IC200ERM002 GE Versamax IC200ERM002 interfaces an expansion [rack" to a Versamax plc or Versamax niu i/o station system. GE Versamax IC200ERM002 the expansion rack...
IC200ETM001 GE Versamax IC200ETM001 is an expansion transmitter module. GE Versamax IC200ETM001 is used to expand a Versamax plc or niu i/o station to include up to seven...
IC200GBI001
The genius network interface unit GE Versamax IC200GBI001 operates as a device on a genius bus. The GE Versamax IC200GBI001 is capable of handling up to...

Contact us if you need more details on Fanuc Series 90-70 IC697ACC702. We are ready to answer your questions on packaging, logistics, certification or any other aspects about GE Bus Terminator Plug、Based on 5 Ratings. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : General Electric Fanuc > GE PLC 90-70 CPU Parts